Products
Coating Categories
Nitrocellulose Coatings
Nitrocellulose coatings are solvents that evaporate quickly at room temperature while converting liquid coating into the solid coating.
The advantages are easy to dry, easy to apply and easy to repair.
Because the base coat exhibits durable friction-resistant quality, it makes coating adhere more easily.
In general, it is the most economic and efficient coating method.
Product Links
Polyurethane Coatings
To form Polyurethane coatings, the main agent and hardener should be evenly mixed to form bridge reaction.
Due to different OH values between the main agent and hardener, Isocyanate, the coating ratio would be different, including 1:1, 2:1, and etc.
After drying, Polyurethane coatings show excellent performance on both physical and chemical properties such as abrasion resistance, adhesion, toughness, weatherability, and chemical resistance.
Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear-and-tear, where excellent chemical/physical resistance is required.
Product Links
UV-Curable Coatings
The reaction theory of UV coating is a process in which high intensity ultraviolet light is used to create a photochemical reaction that instantly cures inks, adhesives, and coatings.
Low temperature, high speed, and solventless process—cured by polymerization rather than by conventional solvent evaporation is its primary advantage.
Other than increasing productivity by shortening drying waiting time, increasing coating hardness and quality is also its benefit.
The other notable benefit is that manufacturers can devote less space to finishing items since they do not have to wait for them to dry.
This creates an efficiency that translates through the entire manufacturing process.
Product Links
WATER-BASED PAINT
Simply put, water-based coating used water as the diluting solution. It requires no other solvent for dilution and thus the chance of absorbing volatile solvent during painting process would be none.
Water-based coatings, as a result of their many advantages, have become the leading technology in the paint industry: environmentally friendly, odorless, tasteless, no yellowing and reduction of spray powder.
Compared to other coatings, the water-based coating is more safe and environmental conserving, for which contributing to its higher cost.
Although the use of water-based paint requires no large-scale replacement of facility, it still has its shortcomings such as: 1.coating subjects require special surface treatment in order to avoid surface pore shrinkage,
2. Base material was poorly moisturized due to high surface tension 3. Probability of freezing at low temperature 4. Electrostatic coating must be fully insulated.
Product Links
OTHERS
TPU:
The characteristics of TPU are excellent resistance to twists, turns, and stains.It’s suitable for TPU and TPE material.
Baked Coating:
The curing temperature of this type temperature is 130-180°C.We usually use short-oil alkyd resin and three polyamine resin paint, low-temperature curing polymerization.
The characteristics of the surface are non-sticky, weather ability, the resistance of the advantages.
PUS:
We mainly used polyols, diisocyanate, water, catalyst, foaming agent and other additives to mix in high-speed mixing conditions after the foam.
Characteristics of the coating are drying speed, easy operation, good twists and turns, good adhesion.
Product Links
Coating Surfaces
Wood
Wood, a kind of heterogeneous natural organic matter, is composed of a variety of porous, moisturizing and catheter cells, making its coating process complicated.
Successful coating process requires not only to fully understand the material and appearance, but also to carefully consider the coloring, filling, coating, gloss, coating surface and other factors.
A good coating will affect the final additional value of products, our company have a sound product system planning: NC, PU, UV, WATER-BASED, can be customized with the demand system.
An impeccable coating will massively influence the final value of the product; therefore, our company proposes our customer a complete and systemic product coating plan, ranging from PU, UV to water-based coating.
Customized coating to meet your special request is also available.
Product Links
Plastic
Plastic such as PC, ABS and PS, can be said to be the most widely used non-metallic materials. Lightweight, perfect insulation performance and substantial hardness are all its key features.
The surface coating can deliver a mimic metallic sense and color which can not be obtained by the one-piece molded article;
it can also mask the damage caused at molding which would lead to enhancement of the surface hardness, abrasion resistance, chemical resistance, weather resistance and etc.
Our company has a complete product system plan for plastic; PU, UV coating can be customized on demand.
Product Links
Metal
In order to protect metal against rust, the protective coating was made to protect the metal surface.
The metal coating film has to fulfill the quality of such: good adhesion, weathering, corrosion resistance and chemical resistance.
Our company has a complete product system planning for metal; PU, UV coating can be customized on demand.
Product Links
Carbon Fiber
Carbon fiber is characterized by high temperature resistance, friction, conductivity, and corrosion.
Based on its high strength and lightweight, it is now widely used composite materials, such as bicycle frame, car frame, unmanned aircraft, badminton racket and etc.
Our company has a complete product system planning for carbon fiber; PU, UV coating can be customized on demand.
Product Links
Others
Glass:
The main component of glass is silica.Different additives will change the characteristics in glass.
Our company has the corresponding baking varnish system in the general glass.
Polyurethane Foam:
Polyurethane Foam is the synthetic high polymer.When adding foaming agent in the prepolymer, it will foam molding with moisture in the air,
This material will be used in the sole material.Our company has the corresponding spray paint system in this material.
Golf:
Golf material was made byＳurlyn which producing by DuPont with the unique polymerization process.
Our company has a sound product system planning: PU, UV, can meet the needs of customer system.
Product Links